Handheld Airbrush Gun for applying Glitter & Color on Cakes

New handheld airbrush gun for applying glitter and color to your sweets, easily and economically!

Set includes 4 containers for different colors or types of colors.

This gun can spray either edible glimmer color or dry glitter on any surface like a cake!

To apply with liquid color, fill the container with some clean alcohol, prefer the rejuvenator spirit which is more economical compared to pure alcohol or drinks that leave a smell, and then pour your color into the container with the alcohol. The tube should stay in the container with the color to draw the color to the pump. Hold the gun's container downwards ( toward the floor) and pump aiming at your cake. (As a general rule, use 1 part alcohol to 1/2 part color. Adjust dosage to your particular color type, as depending on the brand and the intensity of the color you want to achieve, the ratio will need to differ). e.g., 10ml alcohol with about 5ml color  is a rule of thumb to start with.

Watch this video to see how to properly use your pump for various applications

To use with glitter (dry), remove the tube that draws the color from the container (otherwise it will clog), pour the glitter into the container without any liquids, and then turn the transparent container with the glitter upwards (toward the ceiling) and pump aiming at your cake. Be careful, dry glitter needs a wet surface to stick properly, such as buttercream, chocolate, etc!

To avoid clogging the nozzle of your gun, you should NOT mix dry glitter and liquid color in the same airbrush-gun. If you have to do it, make sure you have rinsed the container and the gun thoroughly with plenty of water and it has FULLY dried afterwards. To wash correctly, fill the container with clean filtered water, leave the tube inside the container and with the container towards the floor, pump until the water from the container is finished or until the water coming out is completely clean. 

Watch this video to see how to properly care for your pump

If you use it with alcohol, wait for the alcohol to dry completely and recover as much of your dye left in the container for use with your next work. The color does not spoil and you can use it again.

The gun has an o-ring inside which, along with the chamber, needs lubrication after each use so that it lasts a long time and does not break and works correctly. To lubricate properly, you should drop 2-3 drops of some vegetable oil into the hole at the back of the chamber after each use. CAUTION: Water should not enter this hole or it may ruin the pump.

Dimensions: L24.6 x H13.2cm.

Product does NOT offer certification for use with food.